Dear Community:
The Openpilot Community needs your help to continue to keep opc.ai's lights on and support the path to Workbench v0.2. With only a one person crew and without commercial funding it's not always financially feasible to fund these services out of pocket. Please consider becoming a Patreon supporter of the Openpilot Community project and receive exclusive perks and benefits!
Become a patreon Learn more Maybe Later

DISCLAIMER: This website is maintained by openpilot users and contributors. The content found here (including Workbench and Oppey the Bot) are not approved, supported, affiliated or funded by Comma.ai, Inc. Please DO NOT contact Comma.ai, Inc. staff about these things as they WILL NOT provide support. For support on openpilot, opc.ai, oppey, workbench, etc. please contact a community member on Discord.

Giraffe (Subaru)

What's there to say!!! It's like all the other Giraffes, Just replace inline with your eyesight connector, connect your Panda and WOOSH your off to start communicating with your car!

This Snazzy device is all you need to get started interfacing with your cars CAN System so it can drive itself!
Comes premade ready to go!

Confirmed Supported Subarus:
Outback/Legacy

  • Should support others with EyeSight

(NEO compatibality available upon request)

Subaru not yet fully supported by OpenPilot -
NO CUTTING! and 100% discrete -
Use the switches to change between OpenPilot & Stock EyeSight

About the Giraffe

The Giraffe is responsible for passing through signals to your vehicles existing driver assistance system.

It features small toggle switches that allow you to turn the individual pass-throughs on or off to block the signals. This saves you from having to physically unplug or detach anything from the vehicle to resume using the stock system. It's like unplugging, but better.

It also allows you to optionally proxy the signals through to your Panda. When used with a White Panda you're able to get more signals and access to read from your car's radar.

It also has a NEO compatible fake ethernet port with access to CAN1, CAN2, started detect, +12v, and ground.

A note on the FAKE ethernet port.

DO NOT use this to connect to your laptop or network. It will break stuff.

Where to purchase

These are available for purchase here.

Guides

Thats easy!!! Follow the yellow brick road!... erm wrong FAQ......
  • Clayson
  • ·
  • 5M
  • ·
  • 1 min read
Firstly you will need to check the batch code of...
  • Clayson
  • ·
  • 5M
  • ·
  • 4 min read